Eaton XNE-1SWIRE Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 62

background image

6 Moeller SWIRE conformance criteria

6.2 System behavior with the configuration checks («Moeller Conformance»)

52

XI/ON: XNE-1SWIRE

09/2011 MN05002016Z-EN

www.eaton.com

6.2

System behavior with the configuration checks
(«Moeller Conformance»)

Parameter setting

•

PROFIBUS-DP and CANopen (Byte 1):
• MC = 1 (MXpro: «Moeller compliant» = activate)

•

DeviceNet (Attribute 121 (79

hex

) «PARAM_COMMON_OERATION_MODES»):

• Bit 4 = 1

System behavior with the configuration checks

1

The physical structure of the SWIRE bus is scanned when U

SW

is switched on

(power up) and compared with the configuration stored in the XNE-1SWIRE.
• The SWIRE bus starts operation (SW LED lit) if the physical structure of the

SWIRE bus matches the SWIRE configuration stored in the XNE-1SWIRE.

• The operation is aborted if the physical structure of the SWIRE bus does

not

match the configuration stored in the XNE-1SWIRE (SW LED flashing). The
SWIRE bus only starts operation:
• After the physical structure was stored in the XNE-1SWIRE and a match

was determined:
• Manually, by pressing CFG button (only functions if the SW LED is

flashing).
After the configuration is stored, the physical structure is compared
once more with the configuration stored in the XNE-1SWIRE.

• If the physical structure of the SWIRE bus matches the configuration

stored in the XNE-1SWIRE the next time that U

SW

is switched on.

2

If the PLC configuration check is activated, the configuration stored in the XNE-
1SWIRE is compared with the SET configuration stored in the PLC. The
complete device ID must match.
• If the two configurations match completely, the entire SWIRE bus is ready for

data exchange (RDY LED lit)

• If the two configurations do

not

match completely (RDY LED flashing), the

operation is aborted for the entire SWIRE bus (RDY LED flashing).

3

The system then starts data exchange.

4

The physical structure of the SWIRE bus is monitored continuously during oper-
ation so that any changes on the bus or slave failures can be detected. The
system retains data exchange with the functional slaves if a modification or slave
failure is detected.

«
...
50
51
52
53
54
...
»

Содержание XNE-1SWIRE































































Отзывы:

Нет отзывов

Похожие инструкции для XNE-1SWIRE

ACS850-04 series

Бренд: ABB Страницы: 296

Бренд: ABB Страницы: 320

Бренд: ABB Страницы: 50

Бренд: ABB Страницы: 56

Бренд: NEC Страницы: 149

Бренд: NEC Страницы: 13

Max Charge MC-624

Бренд: Balmar Страницы: 8

MAX CHARGE MC-614

Бренд: Balmar Страницы: 20

Бренд: jbc Страницы: 4

Бренд: jbc Страницы: 4

Бренд: J+J Страницы: 4

Бренд: Val Controls Страницы: 6

Бренд: Fox Страницы: 5

Бренд: Radionics Страницы: 18

Бренд: Renogy Страницы: 36

Q.PEAK DUO XL-G11S.X / BFG Series

Бренд: Qcells Страницы: 26

Бренд: EpiSensor Страницы: 37

Бренд: Potter Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды