Eaton VoCALL 16, Инструкция по установке и эксплуатации

Страница: 54 / 116

54
InStALLAtIon And opErAtIon mAnuAL 25-13741-E January 2020 www.eaton.com
11. Commissioning
A. Start and end a call.
B. Perform following operations on panel:
i. Accept Faults
ii. View Event Log
iii. View Fault Log
iv. View Call Log
v. Change PIN
vi. Display Settings
ote: n Accepting system fault by ‘MANAGER’ would clear the fault from current
faults log. It is expected that faults are accepted by ‘MANAGER’ only after
they have been corrected.
3. Access level 4 - Authorized access for person who is trained and authorized by
manufacturer to install, service, configure the system, alter its firmware, thereby
changing its basic mode of operation. 4-digit PIN is required to access the system
controls under – ‘ENGINEER’ profile. System can store up to
2 ‘ENGINEER’ profiles.
A. Start and end a call
B. Perform system tests
C. Perform following operations on panel:
i. Accept Faults
ii. View Event Log
iii. View Fault Log
iv. View Call Log
v. Manage Users
vi. Change PIN
vii. Display Settings
viii. System Time / Date
ix. System Service Date
x. Install
xi. Test
xii. Webserver Enable (only for Engineer2 login)
ote: n
Accepting system fault by ‘ENGINEER’ would clear the fault from current
faults log. It is expected that faults are accepted by ‘ENGINEER’ only after
they have been corrected.