Eaton SmartWire-DT, Руководство пользователя

Страница: 15 / 130

SmartWire-DT system
11
02/11 MN05006002Z-EN
SmartWire-DT system This manual describes the intelligent SmartWire-DT connec-
tion system. The backbone of the SmartWire-DT system is
the self-configuring SmartWire-DT network in which data
are exchanged with the SmartWire-DT slaves via an 8-
conductor SmartWire-DT network cable (
a
section
“SmartWire-DT network”, page 21). The SmartWire-DT
slaves are provided with a voltage via the SWD network
cable at the same time.
You can connect up to 99 SmartWire-DT slaves, e.g.
switching devices, pilot devices and I/O modules to the
SmartWire-DT network cable.
As the SmartWire-DT slaves are located on-site in the instal-
lation the SmartWire-DT system reduces your wiring costs.
You create your SmartWire-DT topology with the system
components available according to the motto “plug &
work”.
At the beginning of the SmartWire-DT network you always
connect an SmartWire-DT gateway via the SmartWire-DT
ribbon cable.
The SmartWire-DT gateway controls the data interchange
via the SmartWire-DT network as a master function. At the
same time, as a slave function, it exchanges data with the
overriding controller via a field bus system.
www.comoso.com