![background image](http://html1.mh-extra.com/html/eaton/sefelec-cxs40/sefelec-cxs40_operating-manual_526969143.webp)
XS series operating manual
XS user manual v0.55
- 142 -
16 Maintenance and calibration
PRELIMINARY
Our warranty (refer to the beginning of this manual) attests the quality of materials and workmanship
in our products. If malfunction should be suspected or other information is desired call our technical
assistance: (33) 1.64.11.83.48 for FRANCE or contact your local distributor.
INSTRUMENT RETURN
Before returning an instrument to our Service Department, please call them at the above phone
number for shipment instructions. Use packaging that is adequate to protect it from damage.
MAINTENANCE
Our units don’t need particular maintenance except an annual calibration. If problems, please follow
the brief check list here after. If the problem continues, call our service department at the above
number.
LCD SCREEN DOESN’T COME UP:
Check the correct connection of the main cord SE1
Check that the main voltage is in accordance with the value displayed on the main inlet on the rear
panel of the unit
Check the fuse in the main inlet on the rear panel
DISPLAY OF THE MESSAGE : INTERLOCK OPEN or SAFETY LOOP OPEN
Check that the C5 connector has been correctly connected on the rear panel
Check that the correct connection have been done on the C5 connector ( 1-9 and 2-10)
If using an external contact to close the safety interlock, check that the contact works as expected.
The other possibilities for a bad functioning need an intervention inside the unit by qualified people.