![background image](http://html1.mh-extra.com/html/eaton/sefelec-cxs40/sefelec-cxs40_operating-manual_526969012.webp)
XS series operating manual
XS user manual v0.55
- 11 -
1 DIELECTRIC STRENGTH TEST 50VA
(hipot 50VA test)
XS50 / XS56 (5kVAC / 6kVDC)
Output voltage
Alternative 50 or 60Hz ( DC voltage on XS56 model).
From 100V to 5 kVAC in one range (100V to 6 KVDC).
Stability <
1% for
V mains of
10%.
Positive pole to earth with DC voltage
Ripple < 1% for Is=100 µA with DC voltage
Accuracy of the output voltage:
(2%+50volts) in relation with the set value for voltages
between 100 and 5000 volts (6000 volts for DC) and for a current < 100 µA in the fault detection
modes :
I, IMAX or
I+IMAX.
Discharge of the tested specimen and of the internal capacitor through a 1.5 M
resistance with
DC voltage
Voltage reading
By kilovoltmeter directly connected to the output terminals.
Accuracy :
(1.5%+20 volts) of the read value.
Display by 600 points digital indicator.
Short circuit current
<15 mA in AC
for the maximum voltage adjustment.
<15 mA in DC
for the maximum voltage adjustment.
Breakdown detection
Current variation mode:
I
The
TEST detector automatically carries out the subtraction between the current which flows
normally in the device under test (I=U/Z) and the one which occurs at the time of a fault (I'=I+Ifault).
Amplitude adjustable between : 1 mA and 10mA
10% by 1 mA step.
Width of current pulse : 10µS
20%