Eaton Sefelec CXS40, Руководство по эксплуатации

Страница: 103 / 156

XS series operating manual
XS user manual v0.55 - 102 -

the « L » letter is followed by a number between 1 and 8 , giving the test step number and
then by a « space ».

then comes a letter according to the type of the test step :
Function French English German
Insulation M M M
Dielectric strength R H H
Continuity C G E
Void . . . . . .
Pause OK. OK. OK

the measurement type is followed by the memory number which contains the
measurement parameters , then by a separator character « : »

if the test step is void , the measurement will be replaced by a « space »

otherwise , the next character gives the test step result :

« space » indicates that the test is good

« q » indicates that the test is bad

for the insulation and dielectric strength tests the previous character is followed by 1
‘space’ and for the ground continuity test by 2 ‘space’.

then the numerical values are given . When the value cannot be measured ( no continuity
or overload ) the numerical indication is replaced by « ---- »
To check if a tested specimen is good or bad at the end of a sequence , it is necessary to
check the STB register ( bit 3) .To get the result of each test step , check if the result
character is «
space » or « q ».