Page 6
Chapter 1: Introduction to i-on10
The i-on10 control unit is a grade 2, 10-zone control unit for wired detectors and up to four
keypads. The control unit has been designed to satisfy the most demanding requirements
of alarm-systems professionals for domestic and small commercial applications, and is
both easy to install and robust.
Summary of features
The i-on10 features:
Grade 2 compliance.
On-board connections for up to 10 wired zones, a wired siren/strobe unit, external
loudspeaker, and one open-collector output.
An RS485 bus for connecting up to four keypads.
One 8-output plug-by do port.
Support for one full-set level and up to three part-set levels.
Metal case, fitted with a 1A power supply and space for a 12Vdc 7Ah backup battery.
Back and lid tamper switches.
Support for up to 10 users.
Note:
The maximum number of on-board zones is for Fully-Supervised Loop (FSL) or
2-wire Closed Circuit (CC) wiring. If 4-wire CC wiring is used, the maximum number of
on-board zones is halved, unless an optional ADP-10CC board is fitted.
The i-on10 is a member of the i-on range of control units. Table 1 specifies the features
and system limits for each control unit in the i-on range.
