Eaton Scantronic i-on10, Руководство по настройке

Страница: 19 / 73

Configuring the System − Getting Started
Page 19
6. Choose the language:


From this point on, the display operates in the selected language. If you want to
change the language later, use
Installer menu
– System Options – Updates –
Language .
7. Choose the country version you want to use:


8. Select the wiring type to use for wired zones:


Further information about zone wiring types is given on page 14.
Note: If you are using an ADP-10CC board (to provide ten on-board 4-wire CC zones
instead of ten FSL zones), select 2-wire FSL 2k2/4k7 as the wiring type.
Note: You can change this setting later using Installer menu
– System Options
.
9. If you selected the UK as the country version, specify the alarm confirmation mode:


Please refer to page 52 if you need information about confirmation modes. You can
change this setting later using
Installer menu
– System Options – Confirmation –
Confirmation Mode.
10. User codes (e.g. to set or unset the system) can be four or six digits long. Select the
required length:


Note: You can change this setting later using Installer menu
– System Options –
Restore Defaults
– Staged Defaults – Users
.
11. Specify an installer code:


When prompted, confirm the code. DO NOT FORGET THIS CODE!
12. Specify a code for the default master user:


When prompted, confirm the code. DO NOT FORGET THIS CODE!
13. You will see one of the following:

If the lid of the control unit is closed, you will see the standby screen. For
example:


You can change the wiring type by pressing

one or more
times. Press

to continue.
Press

if you want to select six-digit user codes. Press

to
continue. (The Follow Panel Grade option sets user codes to the
default length for the panel grade, which for i-on10 is four digits.)
Use the numeric keys to specify the code.
You can change the country by pressing

one or more times.
Press

to continue.
You can change the language by pressing

one or more times.
Press

to continue.
You can change the confirmation mode by pressing

one or more
times. Press

to continue.