4 Commissioning
4.1 DA1 variable frequency drives
DX-NET-ETHERCAT-2
01/14 MN040009EN
www.eaton.com
25
4 Commissioning
4.1 DA1 variable frequency drives
4.2 ESI file
ESI files (ESI = EtherCAT Slave Interface) are XML files that are used to
define the properties of EtherCAT nodes. In order to be able to connect a
DA1 variable frequency drive to an EtherCAT network, you will require the
corresponding ESI file.
The ESI file contains the following information:
•
Manufacturer,
•
name,
•
part no.,
•
version number,
•
protocol used,
•
configuration data.
→
First of all complete all measures for commissioning the DA1
variable frequency drive as described in the respective manual
MN04020005Z-EN.
→
Check the settings and installations for the connection to the
EtherCAT field bus system which are described in this manual.
NOTICE
Make sure that there is no danger in starting the motor.
Disconnect the driven machine if there is a danger in an
incorrect operating state.
→
For communications, parameter P12 (drive control) must be set
as follows in the DA1 variable frequency drive: P12 = 4.
For detailed information on how to configure parameters, please
refer to manual MN04020005Z-EN.
→
The ESI file can be found on the CD-ROM and on the Internet at:
www.eaton.com/moeller
→
Downloads
Содержание PowerXL DX-NET-ETHERCAT-2
Страница 4: ...II ...
Страница 20: ...2 Engineering 2 2 LED indicators 16 DX NET ETHERCAT 2 01 14 MN040009EN www eaton com ...
Страница 28: ...3 Installation 3 7 Install field bus 24 DX NET ETHERCAT 2 01 14 MN040009EN www eaton com ...
Страница 54: ...4 Commissioning 4 12 CoE communication objects 50 DX NET ETHERCAT 2 01 14 MN040009EN www eaton com ...