![background image](http://html1.mh-extra.com/html/eaton/nzm2/nzm2_manual_4696860127.webp)
NZM-XDMI-DPV1
(PROFIBUS-DPV1 Interface for
DMI)
122
11/04 MN01219002Z-EN
Status[2]
Bit 1
Trip
I
2
t
(if
I
2
t
option selected):
overload variable short-time delayed
Trip
I
mv
(if
I
2
t
option not selected):
overload constant short-time
delayed
Status[3]
Bit 2
Trip
I
r
: overload variable long-time
delayed
Status[4]
Bit 3
Trip
I
dn
: fault current constant short-
time delayed
Status[5]
Bit 4
Trip Select: time limit with H-
selectivity exceeded (not yet
supported)
Status[6]
Bit 5
Trip Com: trip has been initiated via
PROFIBUS-DP
Status[7]
Bit 6
Trip Temp: trip due to device
overtemperature (NZM)
Status[8]
Bit 7
Trip Error: trip due to device fault
(NZM)
Octet 22
2)
Alarm conditions
Status[9]
Bit 0
Load rejection prewarning
Status[10]
Bit 1
Overload range 1
Status[11]
Bit 2
Overload range 2
Status[12]
Bit 3
Motor protection (only significant
with -ME types, otherwise constant
“0”): the circuit-breaker has
detected an overload case and
demands that the DMI switch off the
motor. If the overload continues, the
circuit-breaker will trip.
Status[13]
Bit 4
Unbalance
Bit 5
Not used
Variable access
(example)
Data position
Meaning
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com