DMI
58
11/04 MN01219002Z-EN
valid. In future, the DMI will check for the serial number
it has just accepted when establishing the connection.
– Cut the connection to the DMI by removing the
communication cable and the DMI as it clearly should
not be installed at this location.
The prompt is deactivated by default.
Set clock
This submenu is used to set the real-time clock in the DMI.
X
In the Input menu use cursor buttons
Í
or
Ú
to select Set
Clock.
X
Confirm your selection by pressing
OK
.
X
Use the cursor buttons < or > to set the parameter to be
updated (time, date or year).
X
Use the cursor buttons
Í
or
Ú
to set the required values
between the upper and lower setting limits.
X
Confirm your selection by pressing
OK
.
Warning
If the DMI is to be connected to several circuit-breakers in
succession, all parameters must be set beforehand to their
respective maximum values. Only in this way can it be
ensured that the parameters of the circuit-breaker are not
overwritten by the DMI.
(XX:YY)
(AA:BB)
20XX
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
