Eaton Holec Capitole 40, Руководство пользователя

Страница: 49 / 101

Capitole 40
1991.901 G01 002 49
Figure 3-12 shows a cubicle type CT 4.2 with single busbar
at the end of the unit with an extension to the right.
Figure 3-12
1. existing cubicle 4.2 panel
2. here to be coupled see Figure 2-41
3. new cubicle
Figure 3-13 shows a cubicle type CT 4.2 with parallel
busbars at the end of the unit with an extension to the
right..
Figure 3-13
1. existing cubicle 4.2 panel
2. here to be coupled see Figure 2-43
3. new cubicle
4. new busbar holder
In the other cases, with the exception of bus couplers, the
two busbars are coupled at the point divi-ding the two
cubicles.
In the case of extensions in which direct coupling is made
to the incoming feeder and/or bus coupler cubicles, Eaton
Holec ought to be contacted in order to get specific
instructions.
Note: From May 1997, all busbar connections will be
located at the intersection of two panels when extensions
are carried out. (see Figure 2-41 en 2-28).
1
2 3
1
2 3
4