17
EATON
ET5050 Crimp machine operator´s manual E-EQCR-TT003-E2 May 2019
Operating instructions
Manual operation
Rotate the main power switch located on the right side of the
machine to the “On” position. Wait for the machine to boot
up. (See figure 30).
Use pop up key pad to enter default username "User"
and password "User" to access the ET5050 controller.
Then press the check icon to enter. (See figure 32).
Select “Manual Operation”. (See figure 33).
Figure 30
Figure 32
Figure 33
Step 1
Step 3
Step 4
Press "User Log In" icon to access user log in screen.
(See figure 31).
Figure 31
Step 2
Note: Manual operation is for crimping hose & fittings not in the
pre-populated Eaton database.
!
Follow the settings and calibration steps prior to initial
production use of the machine (Page 29)
Note: “Manual Operation” allows operator to enter and save their
own desired crimp specifications.
!
