15
EATON
ET5050 Crimp machine operator´s manual E-EQCR-TT003-E2 May 2019
Operating instructions
Crimp selections – auto mode continued
After first crimp, compare achieved
crimp dimensions against crimp
specifications. (See figure 27).
Figure 27
Figure 28
Figure 29
Step 13
Step 14
With the
auto retraction
activated
(Green icon, Figure 25), turn the
crimper hydraulic motor on by
depressing the green "Motor On"
button on the controller. Then press
and hold the "Crimp Advance" button
on the controller or depress the foot
pedal if activated. Once the machine
has crimped the fitting, the crimp
tooling will automatically retract and
you can release the cycle start button
or foot pedal. (See figure 25).
Figure 25
Step 12.a. - Auto retraction mode
With the
manual retraction
activated
(Red icon, Figure 26), turn the crimper
hydraulic motor on by depressing
the green "Motor On" button on
the controller. Then press and hold
the "Crimp Advance" button on the
controller or depress the foot pedal
if activated. Once the machine has
crimped the fitting, depress the crimp
tooling retract button to manually retract
the crimp tooling or you can press the
retract foot pedal. (See figure 26).
Figure 26
Step 12.b - Manual retraction mode
If achieved crimp is larger or smaller than
specification, enter the appropriate offset to
correct. Offset will automatically be saved for
specific hose configuration.
Note: Product assembly information is displayed in box on
right side of screen. Additional information (Such as photos,
See figure 28 & 29) are available by pressing the question
mark icon. (See figure 27).
