12
EATON
ET5050 Crimp machine operator´s manual E-EQCR-TT003-E2 May 2019
Follow the settings and calibration steps prior to initial
production use of the machine (Page 27)
Operating instructions
Crimp selections – auto mode
Rotate the main power switch (See figure 13) on the right
side of the machine to the “On” position. Wait for the
machine to boot up.
Enter default username "User" and password "User" to access
the ET5050 controller. Then press the check icon to enter.
(See figure 15).
Select “Crimp Selections” for Eaton factory pre-populated
specifications. (See figure 16).
Figure 13
Figure 15
Figure 16
Step 1
Step 3
Step 4
Press "User Log In" icon to access user log in screen.
(See figure 14).
Figure 14
Step 2
