13
EATON
ET5050 Crimp machine operator´s manual E-EQCR-TT003-E2 May 2019
Operating instructions
Crimp selections – auto mode continued
Screen will prompt you to select “Hose Dash” size, press
down arrow to view options. Make selection by pressing
desired dash size. (See figure 19).
Next select “Fitting Type” by pressing down arrow to view
options and pressing desired “Fitting Type”. (See figure 20).
Figure 17
Figure 19
Figure 20
Step 5
Step 7
Step 8
Select hose series (Use either method A or method B):
A. Use scroll bar on right side of screen to scroll through the
available hose series. Make selection by touching hose
series, then press check mark. (See figure 18).
B. Touch filter box on the left, key pad will pop up, type in
desired hose series and press check mark.
Figure 18
Step 6
Note: Key pad will disappear and selected series will populate in
option A. Then press check mark.
!
Note: If hose series or hose dash size is not available in the
selection, please review Eaton powersource for compatibility. If crimp
specifications and die part number information is available for hose
series and hose dash size on powersource for ET5050, please use
manual mode (page 17) to perform the crimping operation.
!
Select desired product line. (See figure 17).
•
Aeroquip
•
Everflex
•
Industrial
•
Weatherhead
•
Synflex
Note: Favorites icon provides direct selection of commonly
used crimp selections.
!
