![background image](http://html1.mh-extra.com/html/eaton/cutler-hammer-fd100/cutler-hammer-fd100_instructions-manual_3861073019.webp)
IM05805016K
Page 15
Effective October 2007
14.4 Print Modes
While in the MENU mode, the ‘PRINT
ROUTINE’ can be set up for either ‘Auto’ or
‘Manual’.
14.4.1 Auto Print
Messages will print directly to the printer as the
event or alarm occurs.
14.4.2 Manual Print
The event and alarm messages are stored in
memory until the ‘Time/Print’ key is depressed, at
which time all stored data is printed. The controller
will store up to 1024 messages on a First In-First
Out basis. To print the stored data hold the ‘Time/
Print’ key for 3 seconds or more.
DO NOT
REMOVE POWER FROM PRINTER UNTIL ALL
MESSAGES ARE PRINTED, OTHERWISE
INFORMATION WILL BE LOST.
14.5 Print Status
When programmed as YES, the printer will print
the “STATUS” of the controller upon exiting the
program mode and
only
after selecting AUTO,
MANUAL or TEST mode on the main switch.
14.6 Printer Deviation
Is used to determine how often to print system
pressure fluctuations, in PSI, as programmed by
the user.
For example, if 10 PSI is programmed, each time
the system pressure varies by 10 PSI or greater, the
actual pressure, date and time will be printed on the
printout display (if a Mercoid Pressure Switch is
supplied this parameter has no effect).
The programming of the print mode is detailed in
Section 6.
“STATUS” Printout
Alarm & Message Printout
*DO NOT LEAVE IN THIS MODE*