![background image](http://html1.mh-extra.com/html/eaton/cutler-hammer-d64rpb30-series/cutler-hammer-d64rpb30-series_instructions-manual_3862329008.webp)
IL04915001E
Effective 7/09
8
Environment
Operating temperature
-35
°
C to +60
°
C
Storage temperature
-40
°
C to +80
°
C
Humidity
85% max (no condensation)
Ingress protection
IP20
Shock resistance (no malfunction)
10 G
Vibration resistance (no malfunction)
10 G, 10 – 55 Hz at 1.5 mm double amplitude
Mechanical Properties
Width
45 mm
1.77”
Height
70 mm
2.76”
Depth (not including terminal block)
103 mm 4.03”
Depth (including terminal block)
126 mm 4.95”
DIN rail if DIN rail mounted
35 mm
Screws if screw mounted
M4 x 20 #8 x ¾” (2 required)
Weight (open)
0.40 kg
0.88 lbs.
Weight (packaged)
0.49 kg
1.08 lbs.
Applicable standards
EN 61000-6-3
Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission
standard for residential, commercial and light-industrial environments (=lowest levels)
30-230 MHz
30 dB
µ
V at 10 m distance
230-1000 MHz 37 dB
µ
V at 10 m distance
EN 61000-6-2
Electromagnetic compatibility (EMC) – Part 6-2: Generic standards – Immunity
standard for industrial environments (=highest levels)
80-1000 MHz with 80% AM modulation up to 10 V/m at 3 m distance from source
EN 61000-4-2
Electromagnetic compatibility (EMC) for industrial-process measurement and control
equipment – Part 4-2: Electrostatic discharge (ESD) immunity
EN 61000-4-3
Electromagnetic compatibility (EMC) for industrial-process measurement and control
equipment – Part 4-3: Radiated electromagnetic field immunity
EN 61000-4-4
Electromagnetic compatibility (EMC) for industrial-process measurement and control
equipment – Part 4-4: Electrical fast transient/burst immunity
EN 61000-4-5
Electromagnetic compatibility (EMC) for industrial-process measurement and control
equipment – Part 4-5: Surge immunity
EN 61000-4-6
Electromagnetic compatibility (EMC) for industrial-process measurement and control
equipment – Part 4-6: Conducted radio frequency field immunity
EN 61000-4-11 Electromagnetic compatibility (EMC) for industrial-process measurement and control
equipment – Part 4-11: Voltage dips/drops/variations immunity
EN 60947-5-1
Low-voltage switchgear and control gear – Part 5-1: Control circuit devices and
switching elements – Electromechanical control circuit devices
IEC 60755
General requirements for Ground fault current operated protective devices
UL
UL 1053 Ground-Fault Sensing and Relaying Equipment, Class 1
CSA
C22.2 No. 144-M91 Ground Fault Circuit Interrupters
CE
CE mark – Declaration of Conformity