TIME RELAY PCM-01
INSTRUCTION MANUAL
ZAMEL
Sp. z o.o.
pcm-01_inst_ext_gb | 03.02.21
APPEARANCE
FEATURES
TECHNICAL PARAMETERS
DESCRIPTION
● Operating mode: switch on delay (input
voltage release),
● supply voltage control indicator - LED
green,
● power/relay supply indicator and time
measure - LED red,
● time measure accuracy,
● wide time adjustment range,
● constant switch on, switch off function,
● relay output - 1 change-over contact
(NO/NC) contact max 16 A capacity,
● TH 35 DIN rail installation.
The one mode time relay PCM-01 has
a delayed switch on function (reversive)
in automation and control systems. The
relay is released by power supply voltage.
It has a wide time adjustment range from
0,1 s to 10 days. Additional ON/OFF func-
tions enable constant switch on, switch
off of the output (load). The system has
the indicators of power supply voltage, re-
lay mode, and time measure with the help
of red LED diode.
PCM-01
Input (supply) terminals: L, N
Input rated voltage: 230 V AC
Input voltage tolerance: -15 ÷ +10 %
Supply voltage control indicator: LED green
Nominal frequency: 50 / 60 Hz
Rated power consumption: 25 mA
Operating mode number: 1 (switch on delay)
Time adjustment range t: from 0,1 s to 10 days
Time measure accuracy: 0,2 %
Time adjustment: 2x potentiometer ( step)
Power/relay supply indicator and time measure: LED red
Output relay parameters: 1NO/NC - 16 A / 250 V AC1 4000 VA
Number of terminal clamps: 5
Section of connecting cables: from 0,2 to 2,50 mm
2
Ambient temperature range: from -20 to +60
o
C
Operating position: free
Mounting: TH 35 rail (PN-EN 60715)
Protection degree: IP20 (PN-EN 60529)
Overvoltage category: II
Pollution degree: 2
Rated impulse withstand voltage: 2 kV (PN-EN 61000-4-5)
Dimensions (height / width / depth): monomodular (17,5 mm) 90x17,5x66 mm
Weight: 0,08 kg
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04
www.zamel.com
, e-mail: [email protected]
The device should be connected
to a one-phase network in accord-
ance with legally binding stand-
ards. The connection method
is described in this manual. Any
activities related to installation,
connection, and adjustment should be per-
formed by qualified electricians who have read
this user’s manual and familiarised themselves
with device functions. Removing the enclosure
voids the warranty and poses a risk of electric
shock. Before installation, make sure that there
is no voltage on connection cables. To install
the device, use a cross-head screwdriver with
a diameter of 3.5 mm. The proper operation
of the device is affected by how the device is
transported, stored, and used. It is not advis-
able to install the device in the following cases:
lack of any components, damage to or defor-
mation of the device. If the device operates im-
properly, please contact the manufacturer.
NOTE
Do not dispose of this device together
with other waste! To avoid harmful effects
on the environment and human health,
the worn-out device should be stored
in designated areas. Electrical waste
from households may be handed over
to the waste collector established for
this purpose free of change and in any
amount, as well as to the store when
purchasing new equipment.
Input supply terminals (L,N)
Supply voltage control indicator
Power/relay supply indicator
Smooth time adjustment
Time adjustment choice
Output (load) relay terminals (11, 12, 14)
