jel111en1803h
1 / 2
Thank you for choosing NIVELCO instrument.
1. APPLICATION
NITIME
time relays are microprocessor-controlled units suitable for highly diverse timing tasks. The multiple functions, the
universal power supply and (1-module width) the rail mountable construction ensure universal usage (automation, lighting,
heating, motor and ventilation control).
2. TECHNNICAL DATA
2.1
G
ENERAL DATA
TYPE
JEL–111
JEL–121
Number of functions
10
2
Time range
0.1 sec…10 days
0.1 sec…100 days
Time setting controls
rotary switch and potentiometer
Reset time
max. 150 ms
Time deviation
5% – mechanical setting
Repeat accuracy
0.2% – set value stability
Temperature coefficient
0.01% /°C @20 °C
Power supply
12…240 V AC/DC
Power consumption
0.7…3 VA AC, 0.5…1.7 W DC
Output
Relay 1×
SPDT
Rated current
16 A AC1
Inrush current
30 A (<3 sec)
Output indication
multifunctional LED
Switching voltage
250 V AC1 / 24 V DC
Switching power
4000 VA AC1, 384 W DC
Min. switching power
500 mW DC
Electrical lifespan (AC1)
0.7 × 10
5
switching
Mechanical lifespan
3 × 10
7
switching
Electrical connection
terminal for 2.5 mm
2
(AWG14) wire cross-section
Electrical protection
Class II. reinforced insulation
Mechanical connection
DIN EN60715 rail
Ingress protection
IP20
Ambient temperature
–20…+55 °C (
−
4…+131 °F)
Weight
90 g (0.14 lb)
70 g (0.143 lb)
2.2
A
CCESSORIES
–
User’s manual
–
Warranty Card
–
Declaration of Conformity
2.3 O
RDER CODE
NITIME J
E
L
– 1 1
Type
Code
Multifunction 1
Pulse cycler
2
2.4 D
IMENSIONS
3. INSTALLATION
NITIME
time relays can be mounted on DIN EN 60715 rails.
The device should not be installed in highly electromagnetic environment.
Operating temperature must not exceed the limit of the specified operation
temperature even in conditions such as increased ambient temperature or
continuous operation. The device is completely electronic. Consider this during the
installation.
4.
WIRING
5.
COMMISSIONING
5.1
A
DJUSTMENT
The green LED (Un) shows when the unit is turned ON, while the
status of the output is indicated by the multifunctional red LED.
(LED 2). Time and function settings can be set using the
potentiometer and the rotary switch on the front panel.
JEL–121 JEL–111
