47
Mounting and operating instructions compact emergency power supply CEAG LP-STAR
40071860247 (L) September 2018 www.ceag.de
7 Operating
7 .4 .6 Menu 6: “Memory card”
<ok>
Menu 6.1:
selection of the log book entries with
– In line 1: Display of date and time for
the event displayed
– In line 2: Report on type of event
e. g. “Luminaire failure” with more
information in lines 3 and 4
– If, when leafing through the log book
entries the end or the beginning were
reached once again, a corresponding
note must be made.
Exit and return to Menu 6 with
<Menu>
<ok>
Menu 6.2:
Do you really wish
to delete
the logbook?
Menu = No
OK = Yes
<Menu>:
No deletion
and return to
Menu 7 “Memory Card”
<Enter>:
All the log book entries on
the memory card are deleted!
Return to Menu “6 Memory Card”
<ok>
Menu 6.3:
Save configuration on
MemoryCard?
Menu = No
OK = Yes
<Menu>:
No storage
and return to
Menu “7 Memory Card”
<Enter>:
All entries on the memory
card are deleted and overwritten with
the current device configuration!
Return to Menu 6 “Memory Card”
<ok>
Menu 6.4:
Load configuration
from memory card?
Menu = No
OK = Yes
<Menu>:
The existing device
configuration is maintained
and
return to Menu 6 “Memory Card”
<Enter>:
The existing device
configuration is overwritten with
the entries on the memory card!
A new start-up is then carried out .
Return to default display
Overview:
Main menu
Test & Statusmenu
Block & Reset Alarms
Basic setup
Circuit setup
Luminaire setup
Memory card
Send ServicePinMsg
Menu 6
Search logbook
Delete logbook
Save configuration
Load configuration
Menu 7
Function is started
directly from main
menu by clicking on
<ok>
Selection of the menu
points with the keys
<ok>:
confirm selec-
tion
<Menu>: Exit
and return to
previous menu
(with input of
any changes
made)
<ESC>: Exit
and back to
previous menu
(without input
of any changes
made)
Flashing input
prompt
Search logbook
Delete logbook
Save configuration
Load configuration
Search logbook
Delete logbook
Save configuration
Load configuration
Search logbook
Delete logbook
Save configuration
Load configuration
IMPORTANT INFORMATION!
Deleted log book entries cannot be retrieved!
IMPORTANT INFORMATION!
The current configuration will be irretrievably
overwritten by the new configuration!
Search logbook
Delete logbook
Save configuration
Load configuration
11.05.12 12:30:00
Event
Line 3
Line 4
In lines 3 and 4 poss. further information
is displayed regarding the event displayed
in line 2:
In the event of an LED disruption under CG
surveillance e. g.:
Line 3: “Circuit No.”
Line 4: Address(es) of the faulty luminaire(s):
--------------------
In the example shown the luminaires 6, 13
and 14 are faulty - the luminaires 3, 10 and
16 to 20 are not installed.
