16
Manual CEAG CG-Controller for CG 2000/ZB-S
30080001458 (C) July 2016 www.ceag.de
9 Menus
Operation:
Menu One menu level higher
/
Selection in Line
1: Next/previous device
Reset and switch to the
main screen
9.5 «Block/reset» menu
9 .5 .2 Manual reset
If this menu item is identified with a * in cursor position 20, one
or more devices are affected.
9 .5 .1 Block / reset
If the menu items in Lines 1 or 2 are selected in the «Block,
reset» menu and accepted with Enter, the function in question
will be performed immediately!
Line
Display:
1
Device address
XX
↔
2
Manual reset
3
reset
4
Device name
Line
Selection (submenu)
1
Block all
2
Release all
3
Manual reset
∕
4
Line
Selection (main menu)
1
Test menu
2
Block, reset
∕
3
Info divice
4
Setup CG-Controller
5
Setup device
Operation:
n
Flashing cursor = current
cursor position/selection
Menu Back to the main screen
Cursor position lower
Cursor position higher
Select menu item (Enter)
If a device has been affected, it can be reset with manual reset.
After it has been reset, the next device is displayed with manual
reset.
If no other device with manual reset is present, the manual reset
menu closes.
Line
Selection (submenu)
1
Block all
n
2
Release all
3
Manual reset
4
Note:
The manual reset is for backspace the system by hand (or
at CGVision) into general operation-mode after a mains
failure.
This is needed at operational dimmed locations (f.e.
cinemas, etc.) so that the sytem is not reset automatically.