8
Manual CEAG CG-Controller for CG 2000/ZB-S
30080001458 (C) July 2016 www.ceag.de
5 Installation
Floating contact
The controller provides a freely programmable
circuit contact (1 - 2 - 3, Figure 2).
Energising of the relay can be assigned to vari-
ous events. See the «Relay settings» menu
5 Installation
CAUTION!
You must observe the applicable safety
requirements for setting up and operating
electrical equipment as well as the Device
Safety Law and all generally recognised
codes of practice!
5.1 Assembly
Apply bore holes as shown in Figure 1. Fasten
the device in place with suitable screws.
Tighten the screws only to finger tightness!
It is also possible to mount the device on a
35-mm DIN rail.
5.2 Electrical connection
Power connection
The device is designed for operation at 230 V
AC or 24 V DC. Lines must be connected as
shown in Figure 2.
Figure 2: Power connection
L N PE + – 1 2 3
230 V AC 24 V DC relay
1
2
3
198
5
13
7
10
Figure 1: Fastening points
Plug-in slot 2
A(2) B(2)
CG-S-Bus (2)
Figure 3: Bus connection
Bus cables
The bus line from the connected CEAG systems
must be connected to Terminals A(2) B(2)
(Figure 3). 4 terminals are present for each
input.
