![background image](http://html1.mh-extra.com/html/eaton/ceag-cg-controller/ceag-cg-controller_operating-instructions-manual_3783809012.webp)
12
Manual CEAG CG-Controller for CG 2000/ZB-S
30080001458 (C) July 2016 www.ceag.de
8 Status display and fault display
Priority
High
Low
Table 3: Fault display
2) If a communication fault is detected on the CG-S bus with one
or more devices, the device with the highest device address is
always displayed as the fault.
Line 2 (main screen) Fault message
Single Group
fault message
1 Com. fault device xx 2)
yes
no
2 Mains failure of device
yes
no
3 Mains failure of UV S3/S4
yes
no
4 Mains failure of UV RS485 yes
no
5 Sum failure
yes
yes
6 Transmission failure
yes
yes
7 Battery failure
yes
yes
8 Converter failure
yes
yes
9 Charge/isol. failure
yes
yes
10 Luminaire failure
yes
yes
11 Minimum duration
yes
yes
Table 2: Status display
Line 2 (main screen)
1 DT running
2 FT running
3 Blocked
4 Battery operation
5 Mains failure of UV-A
1
)
6 Deep discharge protection
7 Manual reset
8 DLS/TLS failure
1) Displayed if the mains failure affects the RS485 substation.
Priority
High
Low