![background image](http://html1.mh-extra.com/html/eaton/ceag-at-s-series/ceag-at-s-series_mounting-and-operating-instructions_3838380061.webp)
61
10 Maintenance / Checking
MANUAL CEAG AUtoMAtiC tEst systEM At-s
+
40071860177 (C) December 2016 www.ceag.de
<ok>
Menu 2.1:
Block device
Release device
Manual reset
This device
all devices
Device address 01
Device name
Block device
Release device
Manual reset
<ok> initiates the function:
The selected stations will be
swichted free and restart ope-
ration.
Selection with the buttons bet-
ween the displayed options.
Selection of a AT-S
+
system with
Device address referes to search
results in the substation setup
menu 3 «Basic settings»
<ok>
Menu 2.2:
This device
all devices
Device address 01
Device name
<ok> initiates the function:
All functions are cancelled;
all outputs will be isolated!
In case of mains failure occures
no emergency operation.
These must be additionally sepa-
rated on all poles before mainte-
nance work in end circuits. (see
10.3 Enabling of end circuits with
maintenance work)
10.3 Enabling of end circuits with
maintenance work
Block the system via the control unit (figure).
(menu item 8.4.2)
Before commencing maintenance work in the end circuit
this must be separated on all poles. Therefor remove the
end circuit fuses on the module.
After maintenance work is finished, reverse the steps and
cancel blocking at the control unit.