![background image](http://html1.mh-extra.com/html/eaton/ceag-at-s-series/ceag-at-s-series_mounting-and-operating-instructions_3838380055.webp)
55
8 Operating
MANUAL CEAG AUtoMAtiC tEst systEM At-s
+
40071860177 (C) December 2016 www.ceag.de
Overview:
Main menu
Test & status menu
Block,reset
Basic settings
DLS/TLS Setup
Circuit setup
Luminaire setup
Memory card
Menu 5
Deactivate module
Search ext. modules
Text assignment
DLS/TLS-Assignment
Selection of
menu options
with the keys
<ok>:
confirm selec-
tion
<Menu>: can-
cel and return
to the
previous
menu (any
changes
entered are
saved)
<ESC>: cancel
and return to
the
previous
menu (any
changes en-
tered are not
saved)
flashing input
prompt
Menu 5.4:
<ok>
Module number
1
Maintained light (Mains)
Maintained light (Emer.)
Circuit name
Select line 1, 2, 3 or the input fields in
line 1 with
Successive selection of module and
(final) circuit with
Line 4 displays the message “Circuit
text” or a circuit name (see menu 5.3)
Select the settings in line 2 and 3
with keys
Finish and return to Menu 5 with
<Menu>
Notes:
The possible settings in line 3 depend
partly on the selection made in line 2
Switch assignment
in line 2
in line 3
Switch 1
Switch 2
Non maintained mode none
Maintained light
Maintained light
(Emer.)
(mains)
TLS xx/x
(Emer.)
per luminaire setup Maintained light
(Emer.)
TLS xx/x
(Emrgcy)
Timer 1
Maintained light
(Emer.)
Timer 2
DLS xx/y
Timer 1 & 2
TLS xx/y
DLS xx/x
Maintained light
(Emer.)
DLSxx/y
TLS
xx/y
TLS xx/x
Maintained light
(Emer.)
DLS
xx/y
TLS
xx/y
Function keys F1 ... F3 or option inputs
Z1 ... Z4 in line 2 can also be declared as
switches (see menus 3.12 and 3.13 in
“Basic settings”).
Switch assignment is not possible unless
these variable elements have been as-
signed a switch function!
xx: Module number ( 1 ... )
y: Inputs of the module (e.g. for switch
interrogation) or
Switched outputs of TLS modules
TLS can only be assigned to complete
circuits.
Notes:
Additional options with selective
emergency light:
Switch assignment
in line 2
in line 3
Switch 1
Switch 2
Non maintained mode none
or 3-phase monitor Maintained light
(Emer.)
DLS xx/y
TLS xx/y
Maintained light (mains) Maintained light
(Emer.)
TLS xx/x
(Emer.)
per luminaire setup Maintained light
(Emer.)
TLS xx/x
(Emer.)
3-phase monitor
Timer 1
Maintained light
(Emer.)
Timer 2
DLS xx/y
Timer 1 & 2
TLS xx/y
3-phase
monitor
DLS xx/x
Maintained light
(Emer.)
DLSxx/y
TLS
xx/y
3-phase
monitor
TLS xx/x
Maintained light
see note at menu 3.7
Deactivate module
Search ext. modules
Text assignment
DLS/TLS-Assignment