4
1 Important Note / General Information
MANUAL CEAG AUtoMAtiC tEst systEM At-s
+
40071860177 (C) December 2016 www.ceag.de
1 Important Note / General Information
1.1 Description of Symbols
Important safety notes are marked with symbols in these
instructions. These stated notes have to be observed
essentially.
WARNING!
Signifies notes which, when not observed, can cause
impairment of health, (steady) injury or death .
ATTENTION!
Signifies notes which, when not observed, can cause
damage to property and even the collapse of the
system .
NOTE
Includes important hints and advice that is important for
failure-free operation.
1.2 Information regarding these Instructions
These operating instructions show the safe and proper
handling with the system. The stated safety notes and
instructions as well as the local accident prevention- and
safety regulations have to be observed.
Before working with the system, the instructions have to
be read carefully, especially the chapter „Safety Instruc-
tions“.
The figures and circuit diagrams contained in these
assembly and operating instructions are in part intended
only to illustrate the products which are described. In all
cases where
•
dimensionally accurate work is required, or
•
accurate drawings or circuit diagrams that reflect the
specifics of the site are required,
the drawings and plans that have been created specially
for the lighting system must be followed.
1.3 Further Applicable Documents
In the systems, components from other manufacturers
are mounted. These purchasing-components are checked
according to danger evaluation by the manufacturer. They
declare the compliance of the construction with the Euro-
pean and national regulations.
1.4 Liability and Guarantee
All information and notes in these instructions are
compiled according to the valid regulations, the state of
the art, our long-standing knowledge and experience.
Keep the instructions near to the system, accessible for
every person working with the system and at all times.
Read the instructions carefully before working on and
with the system!
CEAG Notlichtsysteme GmbH can accept no liability
and/or give no warranty in respect of any defects that may
occur with the supply and intallation of CEAG emergency
lighting systems and luminaires on the basis of other stan-
dards and regulations which are mandatory in complete
installation packages in conjunction with CEAG products.
You must also comply with all statutes, standards and
directives of the country in which the system is installed
and operated.
CEAG will give no warranty or accept any liability for
damage or consequential damage caused as a result of
•
improper use,
•
failure to comply with regulations and codes of conduct
for the safe operation of the system,
•
unauthorised or inexpert modifications to the connec-
tions and settings of the system, or to the programming
of the system,
•
operating proscribed or unsuitable devices or groups of
devices in the AT-S
+
system.
1.5 Copyright Protection
All information from the contents, text, drawings, pictures
and further representations are protected with regards to
copyright.
1.6 Spare Parts
Only use original spare parts from the manufacturer
ATTENTION!
Wrong or faulty spare parts can cause damage,
failure or collapse of the system .
When using unapproved spare parts, all guarantee,
service, damage and liability claims are forfeited.
1.7 Recycling
Packing materials are not refuse, they are
valuable materials and should be re-used
or recycled.
CEAG has been awarded the Recycling
Certificate of INTERSEROH GmbH. The
contract number is 85405. It guarantees
that the packaging materials which it covers are properly
recycled and that all the requirements of the German
Packaging Code are complied with.
INTERSEROH collection points are required to dispose of
CEAG packaging free of charge.
Electronic components contain materials that can damage
health and the environment if not properly disposed of.
Dispose of electronic components in accordance with
national guidelines and regulations.
2 Safety
The automatic test system is designed and built in confor-
mity with the latest technical rules at the time of its devel-
opment and production, so it is safe to operate. Danger
maybe presented by the device, if it will be used for other
than the intended purpose and by unskilled personnel.
