![background image](http://html1.mh-extra.com/html/eaton/ceag-at-s-c0/ceag-at-s-c0_mounting-and-operating-instructions_526964051.webp)
51
8 Operating
MANUAL CEAG AUtoMAtiC tEst systEM At-s
+
40071860177 (C) December 2016 www.ceag.de
This option can be used to assign functions
to the option inputs (Z1 ... Z4 on the control
module); the functions are executed as
soon as the relevant 24V analog inputs are
triggered.
Only one function can be assigned per
input; the star icon goes out when an input
is assigned another function.
Select the option input
(1 to 4) with keys
Highlight the events with
Select the function (
) with <ok>
Finish and return to Menu 3 with
<Menu>
Substation setup
Connection to BMS
Function keys
Optional inputs
etc.
<ok>
Menu 3.14:
1
)
2
)
Option input 1
No function
Switch
Switch inverted
Manual reset
Start functiontest
all luminaires on
F-Test cancellation
Block device
maintained off
non-maintained on
Ventilator monitor
Ext. ISO monitor
Ext. Battery monitor
Ext. Monitor
Ext. Source ready
Ext. Source active
Ext. Source failure
Notes:
1
) The “Switch” assignment allows integration into the switch assignment (see menu options 5.4 and
6.3 “Switch assignments” in menus 5 “Circuit setup” and 6 “Luminaire setup”.
2
) The “Switch inverted” assignment initiates the function when the analog inputs are triggered invert-
ed.
Important note!
The “Switch”, “Switch inverted”, “all luminaires on”, “Ventilator monitor”, “Ext. ISO monitor”, “Ext.
Battery Monitor”, “Ext. Monitor”, “Ext. Source ready”, “Ext. Source active”, “Ext. Source failure
functions” require a 24 V level trigger. All other functions require an edge-triggered signal from
LOW to HIGH.
<ok>
Menu 3.15:
Type: AT-S+
Serial No:123456/02
Connection to BMS
Function keys
Optional inputs
Serialnumber & type
etc.
Overview:
Main menu
Test & status menu
Block,reset
Basic settings
DLS/TLS Setup
Circuit setup
Luminaire setup
Memory card
Menu 3
Language
Date & time
Functiontest
Delay time mains return
Manual reset
Selective EmgcyOper.
Relay setup
Buzzer setup
Display setup
Timer setup
Substation setup
Connection to BMS
Function keys
Optional inputs
Serialnumber & type
Password protection
Daylight saving time
Service info
Selection of
menu options
with the
keys
<ok>:
confirm selec-
tion
<Menu>: can-
cel and return
to the previous
menu (any
changes
entered are
saved)
<ESC>: cancel
and return to
the previous
menu (any
changes en-
tered are not
saved)
flashing input
prompt