![background image](http://html1.mh-extra.com/html/eaton/ceag-at-s-c0/ceag-at-s-c0_mounting-and-operating-instructions_526964025.webp)
25
4. Construction and Function
MANUAL CEAG AUtoMAtiC tEst systEM At-s
+
40071860177 (C) December 2016 www.ceag.de
Status-/ Failure LED
Network connection
RJ45
Service Pin
Connection of the
6-pole data cable to
the control unit
CU CG-S
Service
Störung
Failure
24V
+ -
PE
+ –
PE
24 V DC from
DC/DC inverter.2
Web module connection
The CU-S
+
control unit
must be removed if the
web module is updated.
Comply with instructions
for activation of the control
unit. Connect the ribbon
cable included with the web
module here and route out
through the ventilation slots
of the control unit housing.
Then assemble the control
unit again and connect the
web module.
4 .4 .7 Webmodule
The webmodule is conform to EN 60950-1 and
developed, manufactured and tested according to
DIN EN ISO 9001.
Scope of application
The webmodule ZB-S is used for visualisation and moni-
toring of an automatic test system AT-S
+
via local ethernet
(LAN) with a customary WEB-browser (e. g. Internet
Explorer
TM
). Integrated mail-client for a comfortable and
event based failure notification for up to 5 email address-
ees. Password protected access accounts capable of
parametrisation.
Mounting
Pay attention to temperatures outside the permitted
range during operation. The permissible ambient tempera-
ture may not exceed 55°C.
The module was designed for DIN rail mounting (2TE)
to be only mounted in the cabinet. An external mounting
outside the AT-S
+
cabinet is not permitted.
Electrical connection
Technical Data
Supply voltage
24 V DC
Power consumption
< 1.5W
Connection
RJ 45
Insulation class
III, Degree of protection acc. to
EN 60529: IP 20
Ambient temperature
-10°C ... +55°C
Connection terminal
1.5 mm²
Weight
0.1 kg
Dimensions H x W X D (in mm)
90 x 35 x 58