46
8 Operating
MANUAL CEAG AUtoMAtiC tEst systEM At-s
+
40071860177 (C) December 2016 www.ceag.de
8 .4 .2 Menu 2: “Block, reset”
Overview:
Main menu
Test & status menu
Block,reset
Basic settings
DLS/TLS Setup
Circuit setup
Luminaire setup
Memory card
Menu 2
Block device
Release device
Manual reset
Selection of
menu options
with the
keys
<ok>:
confirm selec-
tion
<Menu>: can-
cel and return
to the previous
menu (any
changes
entered are
saved)
<ESC>: cancel
and return to
the previous
menu (any
changes en-
tered are not
saved)
flashing input
prompt
<ok>
Menu 2.1:
(Menu 2.3: only directly at the station)
<ok> initiates the function if this ope-
ration has been activated in the menu
option «Basic settings»:
Following a mains power failure, normal
operation will not be resumed automati-
cally when mains power is restored if
the “Manual reset (On)” option has been
activated (menu «Basic settings/Manual
reset»).
This guarantees that the emergency
lighting remains on until it is ensured that
the general lighting has been switched
on again, e.g. in a cinema.
Block device
Release device
Manual reset
Block device
Release device
Manual reset
This device
all devices
Device address 01
Device name
Block device
Release device
Manual reset
<ok> initiates the function:
The selected stations will be swichted free
and restart operation.
Selection with the buttons bet-
ween the displayed options.
Selection of a AT-S
+
system with
Device address referes to search
results in the substation setup
menu 3 «Basic settings»
<ok>
Menu 2.2:
This device
all devices
Device address 01
Device name
<ok> initiates the function:
All functions are cancelled;
all outputs will be isolated!
In case of mains failure occures no emer-
gency operation.
These must be additionally separated on
all poles before maintenance work in end
circuits. (see 10.3 Enabling of end circuits
with maintenance work)
