Primer uso
62
5. Inserte el extremo del hilo a través de la guía del hilo 1
12
(de derecha a izquier-
da) (véase la
fig. 5
).
6. Pase el hilo desde arriba hacia abajo a través de los dos discos del regulador de
tensión para el hilo superior
11
y guíelo a través de la guía del hilo 2
9
.
7. Pase el hilo a través de la guía del hilo en el tirahilos (de derecha a izquierda), lue-
go a través de la guía del hilo 3
26
(de arriba a abajo) y, por último, a través del
ojal de guía del hilo
24
(de arriba a abajo) por encima de la aguja.
6
2
21
28
8. Introduzca el extremo del hilo a través del ojal de guía del hilo (de izquierda a de-
recha). Si fuera necesario, también se puede utilizar el enhebrador de aguja
5
(véase el capítulo "Uso del enhebrador de aguja") (véase la
fig. 6
).
9. Levante la palanca del pie prensatelas
28
hasta que este encaje en su sitio. A
continuación, coloque el hilo en el espacio del pie prensatelas
21
.
10. Pase aprox. 4" (10 cm) de hilo a través de la abertura y colóquelo detrás de la má-
quina de coser, de modo que el extremo del hilo quede alejado de usted.
• Además del portabobinas, la máquina de coser cuenta con un
portacarretes
10
, para usar, de forma alternativa, carretes
de hilo disponibles comercialmente como hilo superior. Usar
los carretes de hilo es similar a utilizar bobinas. Para hacerlo,
extraiga completamente el portacarretes y coloque un carrete
de hilo en él. El enhebrado funciona del mismo modo que al
utilizar bobinas.
• Para una costura de tres hilos (dos hilos superiores y uno
inferior), utilice ambos portabobinas al mismo tiempo. El
hilo del portacarretes se enhebrará junto con el hilo del
portabobinas.