Operation
37
3
25
2
20
2. Hold the needle
2
firmly in place and loosen the needle clamp screw
20
by
turning it counterclockwise. If necessary, use tools for assistance. Then remove the
needle (see
Fig. 3
).
4
25
2
20
3. Insert the new needle fully into the needle holder
25
. In doing so, make sure that
the flat side of the needle is aligned with the needle clamp screw (see
Fig. 4
).
4. Hold the needle firmly in place and tighten the needle clamp screw.
5. Lastly, operate the handwheel manually to check whether the sewing machine
can sew neatly.
Do not operate the on/off switch
17
or the foot pedal
6
until the needle has
been inserted correctly and until you have manually checked that the machine
can sew neatly.