First use
24
5
28
5. Lift the presser foot lever
28
to lift the presser foot (see
Fig. 5
).
6
14
6. Hold on to the upper thread and turn the handwheel
14
counterclockwise
(see
Fig. 6
).
The needle
2
will reach into the bobbin case and then pull out the lower thread
(using a loop) as it rises.
7
23
7. When this loop has been created, slightly pull on the upper thread and remove the
end of the lower thread with a needle or scissors.
The bobbin thread should now be pulled through the small hole in the throat
plate
23
(see
Fig. 7
).