EASEPAL EC-380B, Руководство по техническому обслуживанию

Страница: 21 / 34

21
13. Replacement of the side board
①
Disassemble the backrest from the chair
②
Use a cable tie to unfasten the seat pad from the chair by the zippers.
③
Remove the screws (4pcs) securing the side board.
④
Lift the side boards at 90 degrees, then disassemble it from the chair.
⑤
Proceed in the reverse order of disassembly when replacement needed.
14. Replacement of the seat pad
①
Disassemble the backrest from the chair
②
Use a cable tie to unfasten the seat pad from the chair by the zippers.
③
Pull out the air hose Y- connector of the seat pad.
④
Find the connector of the vibration motor in the seat pad, cut the cable ties tightening the wire and
connector, disconnect the connector.
⑤
Then the seat pad can be replaced.
⑥
Proceed in the reverse order of disassembly when assembly.
15. Disassembly of the reclining actuator
①
Disassemble the backrest from the chair, then find the reclining actuator
②
Along the connecting wires of the reclining actuator to find the
2 connectors, then disconnect them.
③
Remove the upper part of the front boards on the right.
④
Then the reclining actuator can be disassembled.
⑤
Proceed in the reverse order of disassembly when assembly.
Air hose Y- connector Cable ties tightening the
wire and connector
Screws(4pcs) securing the front panel Zippers
Reclining actuator