EASEPAL EC-380B, Руководство по техническому обслуживанию

Страница: 15 / 34

15
3. Replacement of cloth of the front cover
①
Unfasten the zipper of the back pad, and lay the back pad on the seat pad.
②
You can find the zipper of the cloth at the left side. Unzip it and replace the cloth if needed.
4. Disassembly and replacement of the rear cover
If you find any cracks on the rear cover, you can proceed as follow:
①
Unfasten the zippers of the outer cloth of the rear cover.
②
Find 4 pieces of screws fixing the rear cover.
③
Remove the screws with a plus screwdriver.
④
Then the rear cover can be removed.
⑤
If it’s damaged, a new one should be replaced.
Attention: Take care not to damage the rear cover to
avoid bad external appearance. Proceed in the reverse
order of disassembly when assembling the rear cover.
Tool: a plus screwdriver
5. Disassembly and replacement of the front cover of the back rest
If you find any cracks on the front cover or any rips in the inside cloth, you can proceed as follow:
①
After disassemble the rear cover, you can find 6 pieces of screws fastening the front cover to back frame.
②
Remove the screws with a plus screwdriver, then the front cover can be removed.
③
Proceed in the reverse order of above operation if replacement needed.
Lay the back pad on the seat part Unfasten the zipper zip
Screws securing the rear cover
A. Connecting rod (on the backrest)
B. U stay fork of reclining actuator (on the seat)
C. Flat head rivet
D. Split pin
Lift the backrest
at 90 degrees.