20
VII. Maintenance of the seat part
9. Replacement of the remote controller holder
①
Pull out the remote controller from the holder.
②
Remove the screw bolt tightening the holder.
③
Take away the holder from the support.
④
Install a new holder on the support.
⑤
Tighten the holder with the screw bolt.
10. Replacement of the remote controller
①
Remove the screws (9pcs) on the back cover of the controller
②
Disconnect the wire terminal of controller PCB; Then remove the screws(2pcs) on the PCB
.
③
Then you can replace any parts of the controller including PCB, Front cover and Back cover.
11. Replacement of the remote controller wire
④
Along the controller wire and remove the screws(6pcs) fixing the “R” nip
and disconnect wire terminal of controller.
⑤
Replace the new wire and fix it on the board, then connect
the terminal of controller.
.
12. Replacement of the front panel of seat part
①
Turn on the power and raise the foot rest to the highest position.
②
Operate the Zero-G 2 function to raise the seat-rest,
③
Remove the screws(12pcs) securing the front panel.
④
Then the front panel can be removed, replace it with a new one, and tighten it with screws.
Raise the foot rest to the
highest position
Screw bolt
“R” nip
Screw bolt
Screws(12pcs) securing the front panel
Содержание EC-380B
Страница 3: ...3 I Specifications...
Страница 31: ......
Страница 34: ...3 5V 1 GND 2 PTE6 I O 3 PTE5 I O 4 PTE4 I O 5 PTE3 I O J26 6 5V TJC3S 6A...