EASEPAL EC-380B, Руководство по техническому обслуживанию

Страница: 27 / 34

27
27. Replacement of upper outer coating of foot rest
①
First you should disassemble the whole foot rest, and the cover of foot rest should be removed.
②
Rotate the belt wheel to extend the foot rest to the longest position. Remove the screws tightening the
upper part of the foot rest.
③
Unzip the side zipper of the upper outer coating, then Remove the screws fixing the outer coating.
④
Unfasten the zippers between the upper and lower part of the foot rest, then the outer coating can be
remove.
⑤
Proceed in the reverse order of disassembly when assembly.
28. Replacement of lower outer coating of foot rest
①
First you should disassemble the whole foot rest, and the cover of foot rest should be removed.
②
Rotate the belt wheel to extend the foot rest to the longest position. Remove the screw bolts fixing two
rubber supports at the bottom of the foot rest.
③
Unfasten the zipper at the bottom of the foot rest, then remove the screws fixing the PE board and take
away the PE board.
④
Remove the nuts fixing the lower part of the foot rest.
⑤
Rotate the cover of the wheel castor, then it can be removed. Removed screw bolt fixing the caster
wheel, then the castor can be removed.
Screws tightening the upper part
Rubber supports
Screws fixing the outer coating
Nuts fixing the lower part
Screws fixing the PE board
Caster wheel