Product Manual Oria Thermostat
EAE KNX Oria Thermostat
Oria Thermostat PM R1.0
©
EAE Technology
www.eaetechnology.com
Sayfa
23
/ 50
4.2.2.2.2
Communication Objects
No
Object Name
Function
Data type
Flags
1
PushButton1 –
switch
On/Off
1 bit
DPT 1.001
CWT
On/Off telegrams will be send to group address that is linked to this communication object.
2
PushButton1 –
dimming
Dim
4 bit
DPT 3.007
CWT
Dimming values will be send to group address that is linked to this communication object.
3
PushButton1-Status
Comm.Obj.
On/Off
1 bit
DPT 1.002
CWT
Confirmation for On/Off switch telegrams will be received from this communication object. If these
communications object visible, it must link to an appropriate group address. Otherwise status LEDs will not
function correctly. If status confirmation not to be used the communication object should be disabled by
“Separate Comm Object” parameter.
Table 20
4.2.2.3
Shutter
Figure 10
Selecting “Shutter” for “Push Button Function” enables shutter operation for push buttons. Shutter functions
can be configured to control two different shutter operations “Shutter/Venetian Blind” function or
“Blind/Roller/Awning” function. In both functions push button can be configured as 3 different button
function; Up, Down and Toggle. When push button selected as up or down, that button can only move the
blind and lamella to the configured direction. For example, if configured as up button, push button can be used
to move the blind up and adjust the lamella down. If push button configured as toggle button, single button
can be used to move the blind up – down and adjust lamella up – down.
Shutter/Venetian Blind Function
When “Controller Type” configured as “Shutter/Venetian Blind”, lamella operations of blind control will be
enabled as “short press” function of the push button. Also, “Button Function” parameter enables the use of
push button 3 different ways;
Up:
“Long Press” moves the blind upwards; “Short Press” operates two different ways, short
pressed while the blind is moving, stops the blind, short pressed while the blind is not moving adjust
the lamella position down.
Down: “Long Press” moves the blind downwards; “Short Press” operates two different ways, short
