Product Manual Oria Thermostat
EAE KNX Oria Thermostat
Oria Thermostat PM R1.0
©
EAE Technology
www.eaetechnology.com
Sayfa
17
/ 50
This communication object should be linked to an appropriate group address that will be used to detect
whether blind is at “Top Position” (True) or not (False).
4
Rocker1-Bottom
Position
True/False
1 bit
DPT 1.002
CWT
This communication object should be linked to an appropriate group address that will be used to detect
whether blind is at “Bottom Position” (True) or not (False).
Table 12
4.2.1.4
Value Operation
Figure 7
Rocker buttons can be configured to send predefined values from different data types. Values selected for both
rocker buttons will be transmitted over the same communication object.4.2.1.4.1
Parameters
Parameter
Setting
Description
Function of Led
LED Permanently Off
LED always off
LED Permanently On
LED always on
Operation Indication
Status LED of the pressed rocker
button will be on for the time
period selected at “Light Duration
of LED” parameter at “General” tab.
Data Type
No Reaction
1 bit value
1byte value [0…255]
Percent value [%0…%100]
2 byte value [-32768…32767]
2 byte value [0…65535]
4 byte value [floating point]
4 byte value [0…4294967295]
Select data type.
Left Button of Rocker
Sent value
0
/1
Visible when “Data Type” selected
as “1 bit value”.
Transmitted value [0…255]
0
…255
Visible when “Data Type” selected
as “1 byte value”.
Send percent value [%0…%100] 0…
80
…100
Visible when “Data Type” selected
as “percent value”.
