Product Manual Oria Thermostat
EAE KNX Oria Thermostat
Oria Thermostat PM R1.0
©
EAE Technology
www.eaetechnology.com
Sayfa
15
/ 50
Figure 6
Selecting “Shutter” for “Rocker Operation” enables shutter operation for rocker buttons. Shutter functions can
be configured to control two different shutter operations “Shutter/Venetian Blind” function or
“Blind/Roller/Awning” function.
Shutter/Venetian Blind Function
Firstly, select which rocker button is used for “up” operation, which rocker button is used for “down” operation
by “Mode of Buttons” parameter. Both buttons have two functions as “short press” function and “long press”
function, “Long Press Duration” parameter configures the limit time period for “long press” operation. “Long
Press” will be used to move the blind upwards or downwards. “Short press” has two different functions
whether blind is moving or not. When blind is moving “short press” acts as a stop button that stops the blinds
movement, when blind is not moving “short press” function is used to adjust lamella position.
Short Press
Long press
Up Button – Blind Moving
Stop
Up
Down Button – Blind Moving
Stop
Down
Up Button – Blind Stopped
Lamella Down
Up
Down Button – Blind Stopped
Lamella Up
Down
Table 9
When “Up Button” long pressed “Up” telegram will be transmitted using “Rocker1 – Shutter UP/DOWN”
communication object and shutter will start moving upwards until it reaches “Top Position” or “STOP” telegram
transmitted using “Rocker1 – STOP/Lamella Adj.” communication object by short pressing “Up Button” or
“Down Button”.
When “Down Button” long pressed “Down” telegram will be transmitted using “Rocker1 – Shutter UP/DOWN”
communication object and shutter will start moving downwards until it reaches “Bottom Position” or “STOP”
telegram transmitted using “Rocker1 – STOP/Lamella Adj.” communication object by short pressing “Up
Button” or “Down Button”.
When blind is not moving “Up Button” and “Down Button” operate as lamella adjustment and respective
telegram will be send using “Rocker1-STOP/Lamella Adj.” communication object.
Blind/Roller/Awning Function
Selecting “Control Type” parameter as “Blind/Roller/Awning” disables lamella adjustment functions of rocker
buttons. In this control type, when “Up Button” pressed “Up” telegram will be send using “Rocker1 – shutter.
UP/DOWN” communication object and pressed again while blind is moving “STOP” telegram will be send using
“Rocker1 – STOP/Lamella adj.” communication object. When “Down Button” pressed “DOWN” telegram will be
sending using “Rocker1 – shutter. UP/DOWN” communication object and pressed again while blind is moving
“STOP” telegram will be send using “Rocker1 – STOP/Lamella adj.” communication object.
4.2.1.3.1
Parameters
Parameter
Setting
Description
