Product Manual Rosa Switch
EAE KNX Rosa Switch
Rosa Switch PB
©
EAE Technology
www.eaetechnology.com
Page
13
/ 26
4.2.1.2.2
Communication Objects
No
Object Name
Function
Data type
Flags
1
Rocker1 – switch
On/Off
1 bit
DPT 1.001
CWT
On/Off telegrams will be send to group address that is linked to this communication object.
2
Rocker1 – dimming Dim
4 bit
DPT 3.007
CWT
Dimming values will be send to group address that is linked to this communication object.
3
Rocker1-Status
Comm.Obj.
On/Off
1 bit
DPT 1.002
CWT
Confirmation for On/Off switch telegrams will be received from this communication object. If these
communication object visible, it must link to an appropriate group address. Otherwise status LEDs will
not function correctly. If status confirmation not to be used the communication object should be
disabled by “Separate Comm Object” parameter.
Table 8
4.2.1.3
Shutter
Figure 6
Selecting “Shutter” for “Rocker Operation” enables shutter operation for rocker buttons. Shutter
functions can be configured to control two different shutter operations “Shutter/Venetian Blind” function
or “Blind/Roller/Awning” function.
Shutter/Venetian Blind
Firstly, select which rocker button is used for “up” operation, which rocker button is used for “down”
operation by “Mode of Buttons” parameter. Both buttons have two functions as “short touch” function
and “long touch” function, “Long Touch Duration” parameter configures the limit time period for “long
touch” operation. “Long Touch” will be used to move the blind upwards or downwards. “Short touch”
has two different functions whether blind is moving or not. When blind is moving “short touch” acts as
a stop button that stops the blinds movement, when blind is not moving “short touch” function is used
to adjust lamella position.
Short Touch
Long touch
Up Button – Blind Moving
Stop
Up
Down Button – Blind Moving
Stop
Down
Up Button – Blind Stopped
Lamella Down
Up
Down Button – Blind Stopped
Lamella Up
Down
Table 9
