Product Manual Rosa Switch
EAE KNX Rosa Switch
Rosa Switch PB
©
EAE Technology
www.eaetechnology.com
Page
18
/ 26
4.2.2
Touch Buttons
Number of rockers should be selected in “General” tabs in parameters and should be chosen as
compatible with the device that will be configured. Touch buttons are numbered from top to bottom –
right to left, topmost right touch button as touch button 1, near it touch button 2, and so on. Touch
buttons can be configured as 4 different operations and 1 function to disable touch button (No
Function). Operation selection can be configured from “Touch Button N” (N: Touch button number)
tab, visible when “Rocker Operation” selected as “2 Touch Buttons”. Every function enables different
parameters and communication objects that will be explained in the following chapters.
Parameter
Setting
Description
Touch Button Function
No Function
Disables the touch button
Switch
Touch buttons can be used to
send
on/off telegrams. (For
more information Chapter
4.2.2.1)
Switch and Dim
Touch buttons can send on/off
and
dimming telegrams. (For
more information Chapter
4.2.2.2)
Shutter
Touch button can control
shutter, venetian blind, blind,
roller and awning. (For more
information
Chapter 4.2.2.3)
Value Operation
Touch button can send
predefined values from
different data types.
(Refer Section 4.2.2.4)
Table 15
Touch buttons also have status LEDs which can be configured to indicate state of the operation that is
configured
.
4.2.2.1
Switch
Figure 8
Selecting “Switch” as “Touch Button Function“ enables to send 1 bit On(1)/Off(0) telegrams to the group
address that is linked to respective communication object. Touching and releasing buttons can be assigned
to different commands (On, Off, Toggle and No Command). Status LEDs can be configured to notify the
current status of operation directly with buttons or using communication objects for confirmation to show
current status.
