Product Manual Rosa Switch
EAE KNX Rosa Switch
Rosa Switch PB
©
EAE Technology
www.eaetechnology.com
Page 22 / 26
4.2.2.2.2
Communication Objects
No
Object Name
Function
Data type
Flags
1
TouchButton1 –
switch
On/Off
1 bit
DPT 1.001
CWT
On/Off telegrams will be sent to group address that is linked to this communication object.
2
TouchButton1 –
dimming
Dim
4 bit
DPT 3.007
CWT
Dimming values will be send to group address that is linked to this communication object.
3
TouchButton1-
Status
Comm.Obj.
On/Off
1 bit
DPT 1.002
CWT
Confirmation for On/Off switch telegrams will be received from this communication object. If these
communications object visible, it must link to an appropriate group address. Otherwise status LEDs will
not function correctly. If status confirmation not to be used the communication object should be
disabled by “Separate Comm Object” parameter.
Table 20
4.2.2.3
Shutter
Figure 10
Selecting “Shutter” for “Touch Button Function” enables shutter operation for touch buttons. Shutter
functions can be configured to control two different shutter operations “Shutter/Venetian Blind” function
or “Blind/Roller/Awning” function. In both functions touch button can be configured as 3 different button
function; Up, Down and Toggle. When touch button selected as up or down, that button can only move
the blind and lamella to the configured direction. For example, if configured as up button, touch button
can be used to move the blind up and adjust the lamella down. If touch button configured as toggle
button, single button can be used to move the blind up – down and adjust lamella up – down.
Shutter/Venetian Blind Function
When “Controller Type” configured as “Shutter/Venetian Blind”, lamella operations of blind control
will be enabled as “short touch” function of the touch button. Also, “Button Function” parameter
enables the use of touch button 3 different ways;
Up
:
“Long Touch” moves the blind upwards; “Short Touch” operates two different ways,
short touched while the blind is moving, stops the blind, short touched while the blind is not
moving adjust the lamella position down.
Down
: “Long Touch” moves the blind downwards; “Short Touch” operates two different
ways, short touched while the blind is moving, stops the blind, short touched while the blind
is not moving adjust the lamella position up.
