Product Manual Rosa Switch
EAE KNX Rosa Switch
Rosa Switch PB
©
EAE Technology
www.eaetechnology.com
Page
21
/ 26
4.2.2.2.1
Parameters
Parameter
Setting
Description
Dim Operation
Darker (Short Touch Off)
Brighter (Short Touch On)
Darker/Brighter (Short Touch
Toggle)
Select touch button dim operation.
(For more information Chapter
4.2.2.2)
Long Touch Time
300ms/ 400ms/ 500ms/ 600ms/
800ms /
1s
/ 1.2s / 1.5s/ 2s / 3s / 4s / 5s / 6s /
7s
/ 8s / 9s / 10s
Time interval to switch from
“switch/toggle mode” to “dimming
mode”.
Dimming Type
Start Stop
/ Step Wise
Select dimming type. ( For more
information Chapter 4.2.2.2)
Step Value
%100 / %50 / %25 /
%12.5
/ %6.25 /
%3.13 / % 1.56
Visible when dimming type is Step
Wise. Selects the dimming resolution
that will be sending at every “Step
Send Interval”.
Step Send Interval
300ms/ 400ms/ 500ms/ 600ms/
800ms /
1s
/ 1.2s / 1.5s/ 2s / 3s / 4s / 5s / 6s /
7s
/ 8s / 9s / 10s
Visible when dimming type is Step
Wise. Selects the time interval to
send dimming increase/decrease
values
Function of LED
LED Permanently Off
LED always off
LED Permanently On
LED always on
Status Indication
Last transmitted command “on” -> LED
on Last transmitted command “off” ->
LED off If “Separate Comm Object”
enabled, status LEDs will wait for
confirmation before changing status.
Inverted Status Indication
Last transmitted command “on” -> LED
off Last transmitted command “off” ->
LED on If “Separate Comm Object”
enabled, status LEDs will wait for
confirmation before changing status.
Operation Indication
Status LED of the touched touch
button will be on for the time period
selected at “Light Duration of LED”
parameter at “General” tab.
Separate Comm
Object
Enable /
Disable
Only visible when “Function of
LED” selected as “Status
Indication” or “Inverted Status
Indication”. This communication
object is the input of
confirmation for status LEDs. If
selected “Enable” respective
communication object should be
linked to an appropriate group
address.
Table 19
