Product Manual Rosa Switch
EAE KNX Rosa Switch
Rosa Switch PB
©
EAE Technology
www.eaetechnology.com
Page
10
/ 26
4.2.1.1.1
Parameters
Parameter
Setting
Description
Mode of Buttons
Left Button On Right Button
Off
Left Button Off Right Button On
Select which button is ON button and which
button is OFF button
Function of LED
LED permanently Off
LED always Off
LED permanently On
LED always On
Status Indication
Status LED of last touched rocker button is
on, other rocker button is off. If “Separate
Comm Object” parameter selected as
“Enable” status LEDs will wait for
confirmation from communication object
before changing state.
Inverted Status Indication
Status LED of last touched rocker button
is off, other rocker button is on. If
“Separate Comm Object” parameter
selected as “Enable” status LEDs will wait
for confirmation from communication
object before changing state.
Operation Indication
Status LED of the touched rocker button
will be on for the time period selected at
“Light Duration of LED” parameter at
“General” tab.
Separate Comm Object Enable/
Disable
Only visible when “Function of LED”
selected as “Status Indication” or
“Inverted Status Indication”. This
communication objects is the input of
confirmation for status LEDs. If selected
“Enable” respective communication
object should be linked to an appropriate
group address
Table 5
4.2.1.1.2
Communication Objects
No
Object Name
Function
Data Type
Flags
1
Rocker1 – Telegr.switch On/Off
1 bit
DPT 1.001
CWT
On/Off telegrams will be send to group address that is linked to this communication
object.
3
Rocker1 – Status
Comm.Obj.
On/Off
1 bit
DPT 1.002
CWT
Confirmation for On/Off switch telegrams will be received from this communication
object. If these communications object visible, it must link to an appropriate group
address. Otherwise status LEDs will not function correctly. If status confirmation not to
be used the communication object should be disabled by “Separate Comm Object”
parameter.
Table 6
