EAE EE-6435BWF, Инструкция по установке, эксплуатации и ремонту

Страница: 15 / 55

Installation, Operation and Parts Manual
EE-6435BWF
15
4.1.3 Tools and equipment needed for installation
Tool name Specification Quantity
Electrical driller 1
Drill bit D18 and D20 (L=350mm) 1
Open end spanner D17-19 2
Open end spanner D22—24 1
Adjustable wrench >D30 1
Hex socket spanner kits M3 to M10 1
Torque spanner MD400 1
Spline end spanner kits D24—27 1
Phillips screwdriver PH2 1
Flat Tip screwdrivers PH2 1
Knife 1
Plumb this is for levelling 1
Crowbar 40cm 1
Needle Nose Pliers 1
Hammer 4 pounds/10 pounds 1
Circlip Pliers 1
4.1.5 Checking parts
Unfold the package and check if any parts missed as per the following list. Do not hesitate to contact us in case any parts missed, but if you
do not contact us and insist installing upon the lack of some parts, we as well as our dealers will not bear any responsibility for this and will
charge for any parts subsequently demanded by the buyer.
S/N Name Qty
1 Platform A 1
2 Platform B 1
3 Power side post 1
4 Post 3
5 Power side crossbeam 1
6 The opposite crossbeam 1
7 Front wheel retainer 2
8 Power unit 1
9 Control unit 1
10 Slider 8
11 Slider holder 8
12 Protective cover 4
13 Post cap 4
14 Ramp shaft 2
15 Expansion bolt M16*120 16