EAE EE-6435BWF, Инструкция по установке, эксплуатации и ремонту

Страница: 20 / 55

Installation, Operation and Parts Manual
EE-6435BWF
20
Step 7: Install holders for sliding blocks, fix protective covers and fix the other end of the safety ratchets.
1. Make the holder (NO.19) for sliding block be hooked with folded edge of the post and fix it with the crossbeam using M8*12 hex socket
button head screw (NO.20).
2. Fix the protective cover (NO.22) with the crossbeam using M8*12 hex socket button head screw (NO.20).
3. Fix the other end of the safety ratchet at bottom of the post using M8*20 hex socket button head screw (NO.23)
Step 8: Install control and power unit.
1. Firstly, fix the control unit (NO.24) with its installation kit (NO.25) using M6*15 hex socket cylinder head screw (NO.26) and M6 nut
(NO.27).
After that install the control unit onto the power side post using M6*15 hex socket cylinder head screw (NO.26) and M6 nut (NO.27).
2. Fix the plate for hanging power unit (NO.28) onto the side opposite to the control unit and fix the power unit onto the hanging plate as
indicated in the following fig.
24. Control unit 30.M10*35 hex head screw
25.Installation kit for control unit 31.M10 hex nut
26.M6*15 hex socket cylinder head screw 32.φ10 spring washer
27.M6 nut 33.φ10 flat washer
28. Plate for hanging power unit 34. Anti-shock pad
29.power unit
19. Holder for sliding block (including sliding block)
20. Hex socket button head screw M8*12
21. Flat washer φ8
22. Protective cover
23. Hex socket button head screw M8*20