E-Mu Ultraproteus Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 307

E-Mu Ultraproteus Скачать руководство пользователя страница 4

SAVE THESE INSTRUCTIONS

5. UltraProteus should be located away from heat sources such as radiators, heat

registers, fireplaces, stoves, or ovens.

6. UltraProteus should only be connected to a power supply of the type de-

scribed in the operating instructions and as marked on the product.

7. This product, in combination with an amplifier, headphones, and speakers,

may be capable of producing sound levels that could cause full or partial
hearing loss or damaged equipment. Do not operate for long periods of time
at high volume levels or at a level that is uncomfortable. Additionally, care
must be taken when programming any of the filters contained herein using
extreme operating parameters. This action could also produce signals which
result in unacceptable high sound levels as noted previously. If you experi-
ence any hearing loss or ringing of the ears consult your physician.

8. UltraProteus may be equipped with a polarized line plug (one blade wider that

the other). This is a safety feature. If you are unable to insert this plug into
the outlet, do not defeat the safety purpose of the plug. Contact an electrician
to replace your obsolete outlet.

9. The power supply cord of UltraProteus should be unplugged from the outlet

when left unused for a long period of time.

10. Care should be taken so that objects do not fall and liquids are not spilled

into the enclosure of UltraProteus through openings.

11. The product should be serviced by qualified service personnel when:

A. The power supply cord has been damaged; or

B. Objects have fallen on, or liquid has been spilled into the product; or

C. The product has been exposed to rain; or

D. The product does not appear to operate normally or exhibits a

marked change in performance; or

E. The product has been dropped or the enclosure damaged.

12. All servicing should be referred to qualified service personnel.

SAVE THESE INSTRUCTIONS

ii

«
...
2
3
4
5
6
...
»

Содержание Ultraproteus




















































































































































































































































































































Отзывы:

Нет отзывов