manualshive.com logo in svg

E-Mu Ultraproteus, Руководство по эксплуатации, Страница: 228 / 307

Поделиться
Скачать
E-Mu Ultraproteus Скачать руководство пользователя страница 228

207

Chapter 11: Reference Section

Z-PLANE FILTER DESCRIPTIONS

F157

Intervallc4

This filter is similar to the ‘Bendup/Swap’ filter, but here the effect is even
more pronounced. With Frequency Tracking set to 000, pushing the Morph
Offset higher produces and downward sweep of a series of very resonant
harmonics. Set Frequency Tracking to 255, however, and the sweep
reverses. Other effects can be achieved by experimenting with the interac-
tion between these two parameters. Because of its metallic overtones, this
filter can make a good choice for simulating certain percussion instru-
ments, such as steel drums and kalimbas.

Morph: 

Causes a downward sweep of harmonic intervals.

Freq. Tracking: 

Reverses Morph sweep.

Transform 2: 

Not used.

F158

EvenCuts4

This filter produces a series of notches in the frequency spectrum (based on
the even harmonic series), which turn into small bumps when morphed.

Morph: 

Controls the depth of the notches/height of the bumps.

Freq. Tracking: 

Tunes the notches/bumps.

Transform 2: 

Not used.

F159

OddCuts.4

This filter produces a series of notches in the frequency spectrum (based on
the odd harmonic series), which turn into small bumps when morphed.

Morph: 

Controls the depth of the notches/height of the bumps.

Freq. Tracking: 

Tunes the notches/bumps.

Transform 2: 

Not used.

F160

PWMtrans.4

This filter produces a series of harmonically related notches, which become
peaks as the filter is morphed upward — the effect can be similar to pulse
width modulation, depending on the source material. As Frequency Track-
ing is moved upward, the peaks/notches move toward the high end of the
frequency range, and ‘Q’ is increased, producing more resonant sounds.

Morph: 

Controls depth of the peaks/notches.

Freq. Tracking: 

Tunes the filter and controls ‘Q’ amount.

Transform 2: 

Not used.

F161

HiEndQ.4

This filter behaves much like a resonant low-pass filter.

Morph: 

Sweep this for low-pass filter effects.

Freq. Tracking: 

Sets the initial cutoff point of the filter.

Transform 2:

 Not used.

Содержание Ultraproteus




















































































































































































































































































































Отзывы:

Нет отзывов