E-Mu Ultraproteus Скачать руководство пользователя страница 241

Страница: 241 / 307

220

UltraProteus Operation Manual

Z-PLANE FILTER DESCRIPTIONS

F224

HarmShiftr3

Harmonically related filter bands can be moved around by adjusting Filt.
Freq. Track. Higher values for Transform 2 increase overall filter effect.

Morph:

Higher values decrease bandwidth.

Freq. Tracking:

Tunes the filters.

Transform 2:

Increases depth of peaks and notches.

F225

Phaser
Morph:

Spreads all the filters from a single frequency to multiple

frequencies.

Freq. Tracking:

Controls polarity of the filters; below 127 yields

notches, above, peaks.

Transform 2:

Controls filter bandwidth; higher values are wider bands.

F226

HrmncPhaser

The effect of Morph and Freq. Track used together is cumulative; the
highest-band effects are found with both set to 255.

Morph:

Higher values tune the filters higher.

Freq. Tracking:

Higher values tune the filters higher.

Transform 2:

Notches if set below 127, peaks if above.

F227

HrmncPhsr2

Peaks and notches cross one another to produce a variety of phase shifter-
like sweeps.

Morph:

Increasing values move peaks lower, notches higher.

Freq. Tracking:

Higher values increase depth of peaks and notches (at

000, filter is flat).

Transform 2:

Higher values increase filter bandwidth.

F228

Wide Bands

With Transform 2 set low, Morphing produces a series of widely spaced
notches over several octaves. Higher Transform 2 values result in widely
spaced peaks.

Morph:

Increases depth of notches and peaks.

Freq. Tracking:

Tunes the filter.

Transform 2:

Controls polarity.

F229

New Boost

An attempt to make a more versatile version of the popular F71 B Boost.4
filter.

Содержание Ultraproteus




















































































































































































































































































































Результаты поиска

Содержание Ultraproteus

Отзывы:

E-Mu Ultraproteus, Руководство по эксплуатации, Страница: 241 / 307

Результаты поиска

Содержание Ultraproteus

Отзывы: